Mounting options
Here you will find some of the possible mounting solutions for the club and ball washer. Because this unit is packaged according to our retailers specifications, you may not receive all or any of the mounting brackets shown here. Please check our purchase page for instructions on purchasing mounting brackets.
The detailed instructions provided here are published in Adobe Acrobat format and require Adobe Acrobat Reader in order to view them. If you don't already have the reader it is a free download. Click on the button below to get simple download and installation instructions.
There are currently five mounting options for this product.
- fender mount - without bracket
- fender mount - with bracket
- post mount - plastic bracket
- post mount - metal bracket
- suction cup mount
Fender mount (without bracket)
This fender mount solution does not require a bracket and is adaptable to most flat surfaces. Use the template included with every unit to mark and drill holes where you would like the unit mounted. Then use the screws, also included, and screw up through the underside of your flat surface into the unit. DO NOT OVER TIGHTEN.
Fender mount (with bracket)
The fender mount bracket allows you to mount your club and ball washer to most flat surfaces. Once attached to the bottom of the unit, this bracket allows the unit to be attached with screws or double sided tape from above the fender or other surface. This eliminates the need to crawl underneath your golf cart.
The plastic post mount bracket shown here is not included in all packages. Please see our purchase page for availability.
Printable, detailed instructions can be downloaded here: fender_mount.pdf
Post mount (plastic bracket)
This high-impact plastic mounting bracket fits top posts on most golf carts and has a rotatable disk to aid in leveling. Spacers are included for EZ-GO (3/4" x 1-3/4" post) and Club Car (1" x 2" post) as well as a 1" x 1" spacer. This mounting system can also be used to mount the club and ball washer to the sweater basket found on many golf carts.
The plastic post mount bracket shown here is not included in all packages. Please see our purchase page for availability.
Printable, detailed instructions can be downloaded here: post_mount.pdf
Post mount (metal bracket)
This metal bracket fits top posts on most golf carts and can be used to mount the club and ball washer to the sweater basket found on many golf carts.
The metal post mount bracket shown here is not included in all packages. Please see our purchase page for availability.
Printable, detailed instructions can be downloaded here: metal_bracket.pdf
Suction cup mount
The suction cups attach to the bottom of the club and ball washer and allow you to mount the unit on any clean, smooth surface. WARNING: The suction cups are not as secure as the other mounting systems and may not hold the unit in place when driving over bumps.
Suction cups are not included in all packages. Please see our purchase page for availability.
Instructions:
- Screw (3) suction cups into 3 screw holes on bottom of this unit.
- Surface for suction cups must be clean, smooth and dry for proper suction. Suction cups will not stick to porous or dirty surfaces.
- Slightly moisten only the edge of suction cups. Press unit hard onto surface. Over wetting suction cups will cause unit to slide. If unit slides, dry cups, moisten only edge of cups and reapply.